Homebrew PCBs

I'll buy half (250) and split the cost with you.
Larry Taylor  KF6JBG

  ----- Original Message ----- 
  From: grantfair2001 
  To: Homebrew_PCBs@yahoogroups.com 
  Sent: Saturday, October 09, 2004 6:27 PM
  Subject: [Homebrew_PCBs] Re: Help me find eyelets



  Apparently Mouser sells them for $26 for 500. You can get one type for
  10 cents per from Far Circuits: "EYLETS .055 OD .042 ID FOR DOUBLE
  SIDED BOARD THRU HOLES $0.10 EACH; OR YOU CAN BUY DIRECT FROM MOUSER
  AT $26.00 FOR A PACKAGE OF 500."

  http://www.farcircuits.net/misc1.htm

  info is a bottom of page.

  I haven't tried these, but Far Circuits is a ham who sells many
  ham-related PCB's at a very reasonable rate IMO. I assume he would
  know what works well.  I have no connection to them.

  Grant

  --- In Homebrew_PCBs@yahoogroups.com, "dave_needle" <dave@d...> wrote:
  > 
  > 
  > I make many PCBs at home, using copper eyelets at the method for
  > thru-holes.  I used to buy them from Pulsar (formerly DynaArt), but
  > they no longer sell them.  They sent me to their supplier, but the
  > price is now way too high.
  > Does someone know where to get the copper eyelets, or does someone
  > know a good quality alternative?
  > 
  > Thanks
  > 
  > dave





  Be sure to visit the group home and check for new Bookmarks and files:
  http://groups.yahoo.com/group/Homebrew_PCBs 


        Yahoo! Groups Sponsor 
              ADVERTISEMENT
             
       
       


------------------------------------------------------------------------------
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/Homebrew_PCBs/
      
    b.. To unsubscribe from this group, send an email to:
    Homebrew_PCBs-unsubscribe@yahoogroups.com
      
    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]