From: Bob Weiss [mailto:BWeiss@...]
material, developer and etchant from an electronics parts store.
Whatever you use to expose the aluminum sheets used for newspaper
printing will probably work very well for exposing the presensitized
PCBs. Follow the instructions (maybe inside the package) for the PCB
material and do a few test runs to get the exposure/develop/etch times
right.
Have fun!
- Jan
> I made a couple PCB's awhile ago using the decal method and neverThose negatives should work great.
> want to go through that again!. Well anyway, I have access at work
> to a film printer (work at a newspaper) and I can print negatives
> upto a size 11x17".
> I was wondering what do I need to take a blankIf you are in a reasonable sized city, you can get presensitized PCB
> double sided copper board and make it into a circuit board? Do I
> need a developer, light, etchant and resist solution and I am good
> to go? Could anyone also recommend a good company for these products?
material, developer and etchant from an electronics parts store.
Whatever you use to expose the aluminum sheets used for newspaper
printing will probably work very well for exposing the presensitized
PCBs. Follow the instructions (maybe inside the package) for the PCB
material and do a few test runs to get the exposure/develop/etch times
right.
Have fun!
- Jan