Homebrew PCBs

Don't know, but, Epson is releasing a new printer with a straight through
path, 1440 dpi and can accept media up to 1.5 mm thick. Perhaps there is a
way to apply etch resist directly to the board.

----- Original Message -----
From: <dg140@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Tuesday, May 28, 2002 10:08 PM
Subject: [Homebrew_PCBs] Laser verses Inkjet


> What is the general consensus; is a Laserjet, or Injket better for
> photoetching?  If laser printing is clearer, it also has the danger of
> melting the overlay (if plastic is used), yes?
>
> Charles
>
>
>
> Be sure to visit the group home and check for new Bookmarks and files:
> http://groups.yahoo.com/group/Homebrew_PCBs
>
> To unsubscribe from this group, send an email to:
> Homebrew_PCBs-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>