Has anyone used very thin (0.005") positive coated copper clad FR4
boards? Injectorall sells them at Digikey with 1/2 oz copper. How
well do the copper traces survive the etching process and handling
after.
I don't need any thruholes, just traces. Only planning to use as
substitute for wires and for a few SMT components with low pin count.
boards? Injectorall sells them at Digikey with 1/2 oz copper. How
well do the copper traces survive the etching process and handling
after.
I don't need any thruholes, just traces. Only planning to use as
substitute for wires and for a few SMT components with low pin count.