--- In Homebrew_PCBs@yahoogroups.com, "mikezcnc" <eemikez@c...> wrote:
#1) not all people on this list live where they can buy these parts
#2) not all peple on this list can afford to buy these parts.
#3) there is little 'home brew' in a store bought unit.
#4) the HC200 does not handle 3 foot by 4 foot sheets of PBC so there
is a gap between the unit size and the maximum board size.
#5) each week, paper changes and each month, someone posts yet
another 'best paper' Some will hold that magazine paper is best due
to cost and availability.
But, I would grant that it is HIGHLY RECOMENDED as a one shot
solution.
just my 2 cents.
Dave
> Why is it a wrong statement that HC200 and Gootee paper is not all"all there is " would imply there is no room for improvement.
> there is to TT? You don't have to make any changes to it if doing
> 0.040 PCBs. And small chenges for 0.060 IAW provided link
> www.pulsar.gs
#1) not all people on this list live where they can buy these parts
#2) not all peple on this list can afford to buy these parts.
#3) there is little 'home brew' in a store bought unit.
#4) the HC200 does not handle 3 foot by 4 foot sheets of PBC so there
is a gap between the unit size and the maximum board size.
#5) each week, paper changes and each month, someone posts yet
another 'best paper' Some will hold that magazine paper is best due
to cost and availability.
But, I would grant that it is HIGHLY RECOMENDED as a one shot
solution.
just my 2 cents.
Dave