----- Original Message -----
From: "pebo festus" <mebo31@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Sunday, July 04, 2004 7:07 PM
Subject: [Homebrew_PCBs] Re: Inkjet Question
> you CAN print directly to pcb (strip down a printer to take straight
> through feed) but you are going to have to find an ink that is water
> proof and will not clog up your print heads (this is the big catch).
> I have printed directly to pcbs but it was with the standard ink in
> the cartradge--but it is not resist proof. it prints out a great
> picture but resist and water washes it off.
> if you can find some ink that works you will have found the holy
> grail.
Such ink is available, but it requires special printheads (very expensive)
and has to be cured with UV as it is printed on the copper.
Leon
--
Leon Heller, G1HSM
http://www.geocities.com/leon_heller
Message
Re: [Homebrew_PCBs] Re: Inkjet Question
2004-07-04 by Leon Heller