temp probe on my meter.
The oven gauge is not accurate at all
JT
The oven gauge is not accurate at all
JT
----- Original Message -----
From: Phil
To: Homebrew_PCBs@yahoogroups.com
Sent: Sunday, June 20, 2004 11:44 PM
Subject: [Homebrew_PCBs] Reflow Oven (was Re: 4 Layer)
--- In Homebrew_PCBs@yahoogroups.com, "Jeremy Taylor" <jeremy@e...>
wrote:
...
> manually control it by setting it full on (not broil),
> watching my temp gauge and opening the door slightly
> to hold a temp.
what are you using to measure temp - an oven gauge?
Be sure to visit the group home and check for new Bookmarks and files:
http://groups.yahoo.com/group/Homebrew_PCBs
Yahoo! Groups Sponsor
ADVERTISEMENT
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/Homebrew_PCBs/
b.. To unsubscribe from this group, send an email to:
Homebrew_PCBs-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]