Homebrew PCBs

On Sun, 20 Jun 2004 15:07:29 -0000, you wrote:

>--- In Homebrew_PCBs@yahoogroups.com, Markus Zingg <m.zingg@n...>
>wrote:
>> On Sun, 20 Jun 2004 06:42:10 -0400, you wrote:
>> 
>> Although it's clear that such a PCB can't hold up the same as one
>made
>> with predips and a hot press, they hold very well. In practize (and
>> that's honestly all that's important to me) they are usable the very
>> same way as any other board. I.e. no troubles whatsover with
>drilling,
>> applying thin, soldering or whatever.
>
>When you solder, do you reflow solder in an oven or only use an iron.
>My concern is that the board could delaminate in an oven.

Due to the lack of a reflow oven, I solder so far exclusively with an
iron, hence you're probably right that it could happen in an oven. Try
it out and see what happens! I would apreciate to hear feedback from
you once your there.

Markus