Homebrew PCBs

--- In Homebrew_PCBs@yahoogroups.com, Markus Zingg <m.zingg@n...>
wrote:
> On Sun, 20 Jun 2004 06:42:10 -0400, you wrote:
> 
> Although it's clear that such a PCB can't hold up the same as one
made
> with predips and a hot press, they hold very well. In practize (and
> that's honestly all that's important to me) they are usable the very
> same way as any other board. I.e. no troubles whatsover with
drilling,
> applying thin, soldering or whatever.

When you solder, do you reflow solder in an oven or only use an iron.
My concern is that the board could delaminate in an oven.