Homebrew PCBs

Thanks for the reply. I have PTH, Tin/lead electro, and cnc. I was hoping it could be done, What particular brand of epoxy did you use, and did you need a layer of insulating material between boards, or did you use single sided outer boards, with an inner double?
Did you put your vise~glue~boards sandwich in the oven, or did it air dry. How does it hold up??

JT
  ----- Original Message ----- 
  From: Markus Zingg 
  To: Homebrew_PCBs@yahoogroups.com 
  Sent: Sunday, June 20, 2004 5:28 AM
  Subject: Re: [Homebrew_PCBs] 4 Layer


  >What is needed to make 4 layer boards, a press (hot or not) and some sort of
  >glue?
  >
  >JT

  I sucessfully did this with 5 minute epoxy and a homebrew little
  simple press consisting of two vices.

  The most important part though is that you definately will need a
  through plating station or else you will not be able to connect the
  inner layers to the outer ones - errr, or then you have a method I'm
  sure others would be interested to hear about.

  Markus



  Be sure to visit the group home and check for new Bookmarks and files:
  http://groups.yahoo.com/group/Homebrew_PCBs 


        Yahoo! Groups Sponsor 
              ADVERTISEMENT
             
       
       


------------------------------------------------------------------------------
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/Homebrew_PCBs/
      
    b.. To unsubscribe from this group, send an email to:
    Homebrew_PCBs-unsubscribe@yahoogroups.com
      
    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]