Homebrew_PCBs

----- Original Message -----
From: "ballendo" <ballendo@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Monday, June 14, 2004 4:32 PM
Subject: [Homebrew_PCBs] Re: Soldering DIP sockets on the top of the board


> Hello,
>
> I used to buy sockets on a roll(or in strips) which were attached
> at .100 to the strip of metal they were formed from (at the top).
> After soldering, the strip is bent back and forth and it comes off.
> leaving the pins with exact spacing...
>
> Been awhile, but they're prob'ly still available...

I used to use those. They are made by Molex and should still be available.

Leon
--
Leon Heller, G1HSM
http://www.geocities.com/leon_heller