Hi all,
I have found a slightly unusual use for TT component outline printing.
Well, see for yourself:
<http://st.such.info/tt_number.jpg>
You can make signs, this one is on FR4 but i'm sure metal and anything
heat resistant works too.
--> printed front panels etc.
I polish the white paper residue off with abrasive kitchen cleaner.
As you can see it has a big solid black area, which is not totally opaque
if you hold it against light.
Not a problem here but no good if you want to etch.
I really like TT.
ST
I have found a slightly unusual use for TT component outline printing.
Well, see for yourself:
<http://st.such.info/tt_number.jpg>
You can make signs, this one is on FR4 but i'm sure metal and anything
heat resistant works too.
--> printed front panels etc.
I polish the white paper residue off with abrasive kitchen cleaner.
As you can see it has a big solid black area, which is not totally opaque
if you hold it against light.
Not a problem here but no good if you want to etch.
I really like TT.
ST