Homebrew PCBs

Hello,

Here in the US, it's sold at Longs as 99% isopropyl alcohol.

It's sold to clean the skin prior to an injection... So ask where 
diabetic supplies are carried in the stores around you...

I always have a pint nearby the electronics bench. Keep it closed or 
it picks up moisture from the air.

Hope this helps,

Ballendo

--- In Homebrew_PCBs@yahoogroups.com, mpdickens <md30022@y...> wrote:
> > and lots of warnings about damage to brain and
> > nervous system from inhalation or absorption through
> > skin, cannot be made non-poisonous 
> > etc., as well as extreme flammability.
> 
> What you are describing sounds like what is sold in a
> hardware store in the paint section. Like muratic
> acid, it is composed of / manufactured from industrial
> waste products.  
> 
> You can, however, purchase denatured alcohol (Wood
> alcohol 70% by volume. It's diluted with h20 and
> nothing else. No additives, no industrial wastes) at a
> pharmacy. This grade of denatured alcohol is still
> posionous, but then again, so is isopropyl alcohol.
> For that matter, ethanol is also poisonious (Like all
> liquour and wine...) . 
> 
> Best
> 
> Marvin Dickens  
> 
> =====
> Registered Linux User No. 80253
> If you use linux, get counted at: 
> http://www.linuxcounter.org
> 
> 
> 	
> 		
> __________________________________
> Do you Yahoo!?
> Friends.  Fun.  Try the all-new Yahoo! Messenger.
> http://messenger.yahoo.com/