result of steadtler RED 1:1 mixed with denatured alcohol on alu can be
seen at:
<http://stud4.tuwien.ac.at/~e0225977/pub/alu_staedtler.jpg>
the X you see are textmode X,
on the left i printed a solid red vertical stripe in a second run.
I'm not sure how to interpret it, any ideas?
I used the yellow head, one or more jets are clogged.
Should i use the black head? has more nozzles and all are clear says the
test head print.
it is a 720DPI printer, and a 1200DPI scan.
looking forward to discussion.
ST
seen at:
<http://stud4.tuwien.ac.at/~e0225977/pub/alu_staedtler.jpg>
the X you see are textmode X,
on the left i printed a solid red vertical stripe in a second run.
I'm not sure how to interpret it, any ideas?
I used the yellow head, one or more jets are clogged.
Should i use the black head? has more nozzles and all are clear says the
test head print.
it is a 720DPI printer, and a 1200DPI scan.
looking forward to discussion.
ST