On Mon, 24 May 2004 13:33:07 -0300, Alexandre Souza
<alexandre-listas@...> wrote:
off..
you get a yellowish stripe where there is no teflon. does not matter here.
ST
<alexandre-listas@...> wrote:
>> If with your fuser the lamp is dead it is a bad thing.only problem is maybe uneven surface, but you could sand/polish it all
>> But if only the teflon has a few scratches i assume it does not matter
>> in this application.
>
> Teflon isn't even necessary in this application, the teflon is used
> not
> to bind the toner to the aluminium cylinder. You can use a completely
> wasted
> fuser roller - it is **even better** for thermal transfering!
>
off..
you get a yellowish stripe where there is no teflon. does not matter here.
ST