Homebrew PCBs

Dave Mucha wrote:

>--- In Homebrew_PCBs@yahoogroups.com, mickeym <whitemouse@m...> wrote:
>  
>
>>I took a swing at entering the "http://sanisis.netfirms.com/" 
>>    
>>
>schematic 
>  
>
>>in Eagle format.
>>I changed only the extra junction at pin 8 of the PIC, and just put 
>>    
>>
>test 
>  
>
>>pads for the battery and the RX433 module, and used through-hole 
>>    
>>
>parts.
>  
>
>>mickeym
>>
>>Homebrew_PCBs@yahoogroups.com wrote:
>>
>>    
>>
>>>Hello,
>>>
>>>This email message is a notification to let you know that
>>>a file has been uploaded to the Files area of the Homebrew_PCBs 
>>>group.
>>>
>>> File        : /MickeyM/orbacle.sch 
>>> Uploaded by : whitemouse_98 <whitemouse@m...> 
>>> Description : Orbacle Schematic 1.0 
>>>
>>>You can access this file at the URL
>>>
>>>      
>>>
>>http://groups.yahoo.com/group/Homebrew_PCBs/files/MickeyM/orbacle.sch
>>    
>>
> 
>  
>
>>>To learn more about file sharing for your group, please visit
>>>
>>>http://help.yahoo.com/help/us/groups/files
>>>
>>>Regards,
>>>
>>>whitemouse_98 <whitemouse@m...>
>>>
>>>      
>>>
>
>
>OK,
>
>I have not used Eagle, but have recently downloaded it for some 
>attempt at learning it.
>
>Can you tell me how to open the file ?
>
>Eagle does not allow browsing to other folders and the extension .sch 
>is associated with another PCB program I use.
>
>Do I just copy it to a new folder somewhere ?
>
>Dave
>
>
>  
>
After eagle is installed, make a new project, it will make a folder, 
close eagle then copy the file into that folder and re-open eagle.

mickeym