--- In Homebrew_PCBs@yahoogroups.com, Stefan Trethan
<stefan_trethan@g...> wrote:
change.
Since we have been talking about the schematic and the general
excersize of taking an unknown schematic and turning it into a
workable board, this particular thread does not have to die.
IF, the schematic was done and the basic circuit looked workable to
my general overview, I would considder making the board as a favor to
another hobbiest. Many of us need a board to be made before we can
get a mahcine running that will make boards. The old Catch-22
problem.
Anyway, it is only good manners to inform people that the job has
already been assigned. This need not be the whole group, but
certainly those who have sent direct e-mails.
In the case of this project, I'm curious what it is for and what it
will do.
And, since I already found flaws in the schematic (I have no doubt
whatsoever that Stefan will find them as they were simple) I did not
want to get involved in the enginnering of the project.
But, all that said, if someone does push it forward, I would be
interested in seeing what it looks like, and the errors found.
Dave
<stefan_trethan@g...> wrote:
> On Sat, 22 May 2004 13:40:14 -0400, mickeym <whitemouse@m...>schematic
> wrote:
>
> >
> > I took a swing at entering the "http://sanisis.netfirms.com/"
> > in Eagle format.put test
> > I changed only the extra junction at pin 8 of the PIC, and just
> > pads for the battery and the RX433 module, and used through-holeparts.
> >assigned,
> > mickeym
> >
>
> Mickey, I hoped Karega would post here that the work is already
> butalready
> this isn't the case so i have to do it.
>
> There were a changes to the schematic, and the work on the pcb is
> in pogress.I agree that people should acknoledge others and the list when things
>
> You need not waste your time.
>
> ST
change.
Since we have been talking about the schematic and the general
excersize of taking an unknown schematic and turning it into a
workable board, this particular thread does not have to die.
IF, the schematic was done and the basic circuit looked workable to
my general overview, I would considder making the board as a favor to
another hobbiest. Many of us need a board to be made before we can
get a mahcine running that will make boards. The old Catch-22
problem.
Anyway, it is only good manners to inform people that the job has
already been assigned. This need not be the whole group, but
certainly those who have sent direct e-mails.
In the case of this project, I'm curious what it is for and what it
will do.
And, since I already found flaws in the schematic (I have no doubt
whatsoever that Stefan will find them as they were simple) I did not
want to get involved in the enginnering of the project.
But, all that said, if someone does push it forward, I would be
interested in seeing what it looks like, and the errors found.
Dave