Homebrew PCBs

Depends what process your'e going to use for resist. Using laserprinted
paper sheets ironed onto copperclad I get away with 0.02" spacing and trace
widths........ Photoresist will get you down to maybe 0.01" or better.

Lukas


> is there a set thickness when doing a trace is .050 to small or does
> it matter.On the board I just did ,I made most at .125 and the
> smallest is .050 is that ok I have not finnished the board but I will
> post it tonight I still have to but in all the dill holes but let me
> know what you guys think of it so far .
>
>
> John Brauweiler