Homebrew PCBs

HP LJIIID and ALL the error comes from it (rough edge).
The added error of the transfer is much lower than the bad quality of the 
printout.
It seems to be the opposite, things get smoothed out a bit and the 
"sprinkled toner"
(small particles strewn around) are not transferred.

I have HUGE problems with thick traces, pinholes everywhere.
Need another printer.

ST

On Sun, 02 May 2004 01:03:34 -0000, ballendo <ballendo@...> wrote:

> Stefan,
>
> Which printer/toner did you use? Which etchant?
>
> Thank you in advance,
>
> Ballendo
>
> --- In Homebrew_PCBs@yahoogroups.com, Stefan Trethan
> <stefan_trethan@g...> wrote:
>> i have some 7 mil with toner transfer on inkjet paper (much lower $
> than
>> pnp)
>>
>> <http://stud4.tuwien.ac.at/~e0225977/pcb.jpg>
>>
>> good luck
>>
>> ST
>
>
>
>
> Be sure to visit the group home and check for new Bookmarks and files:
> http://groups.yahoo.com/group/Homebrew_PCBs
> Yahoo! Groups Links
>
>
>
>
>