Hello,
Snips, inserts below...
ST>> How long would it take to get the software running, and roughly
hand applied "lines across tssop pads", squiggly and anything but
exact!-- that close enough IS close enough...
And the machine will repeat better than many humans dispensing
manually. (This is not a slam on the machines. The human "servo"
system is incredibly accurate; once "tuned" by practice...)
ST>>to estimate but i need to know if it is like "oh yes, that would
stepper based plunger. FWIW, the EFD dispenser designed for solder
paste uses a leadscrew technique. BUT they put it in the housing of
the unit, and use a flexible plunger to transmit the linear motion to
the handpiece. like a LINEAR, instead of rotating, foredom tool...
(You can learn a lot from patents<G>)
Ballendo
Snips, inserts below...
>In Homebrew_PCBs, "Dave Mucha" <dave_mucha@y...> wrote:ST>> How long would it take to get the
>>drilling software running if myI'd say a few hours; a day, Or two. MAX.
>>layout software produces excellon drill files?
>
>For an fast programmer and a fixed file type and a fixed output
>code,this could be pretty fast. couple of days to a couple of weeks.
ST>> How long would it take to get the software running, and roughly
>>adjusted for solder paste dispensing ?Yes.
>To adjust the software, I think it would be a matter of a few
>boards, or a dozen pads.
>The key is to dispense the EXACT same amount from a new tube as fromYa think so? IMO, it is WELL proven--by the success of boards using
>the middle and the end.
hand applied "lines across tssop pads", squiggly and anything but
exact!-- that close enough IS close enough...
And the machine will repeat better than many humans dispensing
manually. (This is not a slam on the machines. The human "servo"
system is incredibly accurate; once "tuned" by practice...)
ST>>to estimate but i need to know if it is like "oh yes, that would
>>be simple, I know how I would solve that" or "that's tough, nobodyYes, that would be simple. But I've been "into" CNC for decades...
>>has tried this before".
>I see the simplicity... <Snip>then rate of movement would determineIt's still dots. Or steps of the plunger movment, if we're using the
>quantity of dispensing.
stepper based plunger. FWIW, the EFD dispenser designed for solder
paste uses a leadscrew technique. BUT they put it in the housing of
the unit, and use a flexible plunger to transmit the linear motion to
the handpiece. like a LINEAR, instead of rotating, foredom tool...
(You can learn a lot from patents<G>)
>My bottom line on the idea is to build the CNC driller. thatYes. Or buy one from me for 500-1000 bucks... (See my next post)
>machine will work now, for software that is available now. the
>paste dispenser will be an add-on for that by the time you are done
>building.
>Who knows, Ballendo may offer this as an option on his machinesYes. Who knows...<G>
>pretty soon !
Ballendo