Homebrew PCBs

I have to use the copy >com1 comand in a dos prompt to send my files to the
plotter, XP ha no hpgl driver, nor does HP make one. There is a decent
driver available, for close to $400 but it seems to do is do a copy to com1
command behind the scenes. I have used eagles HPGL  it seems to work just
fine (it's in the cam processor section), but more often than not, I tidy
things up in Corel before creating the file.
JT

http://www.soundclick.com/jtsound
----- Original Message ----- 
From: "jackafaz" <greeneaz@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Sunday, April 04, 2004 12:14 PM
Subject: [Homebrew_PCBs] HPGL


> Hi,
>     I use Eagle to generate my PCB artwork. I would like to try
> plotting the output. I have an old HP7475. The documents for Eagle
> say it will output HPGL but I can't seem to find a way to do so. Any
> suggestions would be appreciated. It may be doing it automatically
> when I select my HP7475 as the printer, if so maybe my plotter has
> gone bad - haven't use it in a long time.
>
> Thanks - Jack
>
>
>
>
> Be sure to visit the group home and check for new Bookmarks and files:
> http://groups.yahoo.com/group/Homebrew_PCBs
> Yahoo! Groups Links
>
>
>
>
>