Phil wrote:
marks on the controls for 10 mil increments or whatever)? I took at
look at what was available locally at Harbor Freight and they were all
rather large and crude, with a lot of slop. They also were too high for
a Dremel drill press to have any stroke left.
I imagine something made for use by jewelers would be more suitable than
a typical machine shop cross-vice.
-Johnathan
> With my cross sliding vice...Any recommendations on a sliding vice that has metered action (hash
marks on the controls for 10 mil increments or whatever)? I took at
look at what was available locally at Harbor Freight and they were all
rather large and crude, with a lot of slop. They also were too high for
a Dremel drill press to have any stroke left.
I imagine something made for use by jewelers would be more suitable than
a typical machine shop cross-vice.
-Johnathan