Homebrew PCBs

--- In Homebrew_PCBs@yahoogroups.com, Stefan Trethan 
<stefan_trethan@g...> wrote:
> The same here....
> 
> It's normally not coming off by peelig from FR4 you will have to 
etch.
> 
> Get yourself some muratic acid and H2O2 and then etch the boards.
> 
> I always do chemical etching so it is no problem.
> 
> try to heat the board with the heat gun and peel the copper of, 
maybe it 
> works.
> 
> ST


I think I am spoiled,

The first batch of boards I had were of some other substrate and the 
copper pealed off easily.

I can get muriatic acid from the hardware store, so that is easy 
enough.

Hydrogen dioxide... I've seen that on the list before.  Seems I need 
to scan the list for quality and sources.

IIRC, it is not the diluted stuff one buys to put on cuts.

I just check the polls and there is only the poll about a minimum CNC 
machine.

I wonder if we should put together a poll on what method each of us 
use to make boards.


Dave