On Mon, 08 Mar 2004 16:06:43 -0800, Richard Mustakos <rmustakos@...>
wrote:
so i didn't experience your problems. but it is way too expensive
for me...
Your writing about the printing has brought up the following thought:
if you could print a conductive ink and a isolating ink you could easily
print
multilayer on a "layer by layer" basis, not requiring vias.
ST
wrote:
> You guys were complaining about the vapor from acetone - let me tellI only worked in small quantities with the silver ink.
> you what not to do! Two nights ago I tried to hand draw a circuit onto
> a board with silver conductive ink.
so i didn't experience your problems. but it is way too expensive
for me...
Your writing about the printing has brought up the following thought:
if you could print a conductive ink and a isolating ink you could easily
multilayer on a "layer by layer" basis, not requiring vias.
ST