Homebrew PCBs

On 31/1/04 09:05, gmanca101 at gmanca101@... wrote:

> Bring up an old thread on laminators, I think that the three modified
> parts are the tension springs, arms, and plate. However, the

Trimmed and bottom-posted.

Beware that home laminators may not reach a high enough temp to successfully
transfer toner from the carrier sheet to the copper.

My experiments show that simply bypassing the thermostat didn't work,
possibly due to some over-temperature switch. YMMV.

-- 
Cheers,

Derryck