Homebrew PCBs

No, even the paper does not stick to the board, I've set the 
temperature and finally the copper change color and a little bit of 
toner stick to the copper but not all. I use HP laser jet 2200D and 
I think the toner from this printer is not suitable for toner 
transfer. May be I need to try another printer, but very hard for me 
to look for another one...


--- In Homebrew_PCBs@yahoogroups.com, Stefan Trethan 
<stefan_trethan@g...> wrote:
> On Sat, 10 Jan 2004 09:33:39 -0000, tnk <tnk11@y...> wrote:
> 
> > same for me also, the toner just refuse to stick to the copper,
(I use 
> > cloth iron)  Seem like I need the correct timing and temperature 
and 
> > transfer paper. So far never been successful with this toner 
transfer 
> > method :(
> >
> 
> DOes the iron melt the toner (try transfering it to a second sheet 
of 
> paper).
> 
> If the sheets don't stick together somethig is wrong.
> 
> maybe too cold iron.
> 
> maybe "fuser oil" used.
> 
> if the paper sticks, then maybe the board cleaning is not ok...
> 
> Stefan