Homebrew PCBs

It opened just fine for me in Vector. I am on build 9.3.050

I will e-mail you the file in Vector format off list.

Tim
[Denver, CO]


> -----Original Message-----
> From: Alan Marconett KM6VV [mailto:KM6VV@...] 
> Sent: Wednesday, April 17, 2002 9:00 PM
> To: Homebrew_PCBs@yahoogroups.com
> Subject: Re: [Homebrew_PCBs] DXF file of PCB
> 
> 
> Hi John,
> 
> Just downloaded titfortat.  Vector CAD/CAM didn't like it.  
> Intellicad and FlashCut crashed.  Thoughts?  I'll have to get 
> to another machine to try TurboCad.
> 
> Alan  KM6VV
> 
> crankorgan wrote:
> > 
> > Hi All,
> >        I just uploaded a small PCBoard I did in TurboCad. 
> It is a pure 
> > DXF that can be imported into KCam or other GCODE 
> converters. If you 
> > import the file into KCam you will see my milling method. I 
> go around 
> > and overlap each trace. You will also see the dots that 
> cause the mill 
> > to pre-drill holes. The file is a TRACE of my artwork. After I draw 
> > the PCBoard outline file. I trace it in an efficent mannor. 
> This cuts 
> > down milling time. That PCB take 40 minutes at 6" per minute.
> > 
> >                                            John
> 
> 
> ------------------------ Yahoo! Groups Sponsor 
> ---------------------~--> Buy Stock for $4 and no minimums. 
> FREE Money 2002. 
> http://us.click.yahoo.com/k6cvND/n97DAA/ySSFAA> /bGYolB/TM
> 
> 
> --------------------------------------------------------------
> -------~->
> 
> To unsubscribe from this group, send an email to: 
> Homebrew_PCBs-unsubscribe@yahoogroups.com
> 
>  
> 
> Your use of Yahoo! Groups is subject to 
> http://docs.yahoo.com/info/terms/ 
> 
> 
>