Stefan,
This is the cutter that feeds the board between two rollers and cuts
it while feeding the board. Very unusual but works like a dream. Mike
--- In Homebrew_PCBs@yahoogroups.com, Stefan Trethan
<stefan_trethan@g...> wrote:
This is the cutter that feeds the board between two rollers and cuts
it while feeding the board. Very unusual but works like a dream. Mike
--- In Homebrew_PCBs@yahoogroups.com, Stefan Trethan
<stefan_trethan@g...> wrote:
> On Sun, 28 Dec 2003 06:02:45 -0000, mikezcnc <marabu@c...> wrote:however, I
>
> > The said shears cut wonderfully a regular fiberglass board.
> > just learned that a Radio Shack-type Prottype Board gets crackterribly.
>whole
>
> Do you have a shear which slides down a blade simultaneously the
> length?
> or do you have shear which pivots the blade down?
> Or have i not read wrong and you mentioned a roller?
>
> ST