I occasionally do a one off for my hobby experimentation
using a homebuilt moving table router. The spindle is a 70 watt max
30,000 rpm unit.
I usually use vacuum hold down and the software is a combination of Eagle, pcb-gcode ulp to produce the gcode. This is modified with Autoleveler AE to take care of the variations in the Z axis.
Works for the few times I need a pcb.
Art
Country Bubba
At 11:03 AM 8/13/2017, you wrote:
I usually use vacuum hold down and the software is a combination of Eagle, pcb-gcode ulp to produce the gcode. This is modified with Autoleveler AE to take care of the variations in the Z axis.
Works for the few times I need a pcb.
Art
Country Bubba
At 11:03 AM 8/13/2017, you wrote:
Hi All,
I am considering buying a CNC engraver to manufacture protype PCBs on..
Just wondering What experiance everyone has with this...
Any information greatly apreciated..
Thanks in advance,
Peter T.