We've been down this road.
The PANTUM print 700 times then done.
For $34 I'll take 700 prints on just PCBs....
then spend $50 on the 1,000 print toner cartridge.
Numbers like these would last me years.
The PANTUM print 700 times then done.
For $34 I'll take 700 prints on just PCBs....
then spend $50 on the 1,000 print toner cartridge.
Numbers like these would last me years.
On 12/26/2016 04:31 PM,
mosaicmerc@... [Homebrew_PCBs] wrote:
1) Doing doublesided is not easy.
2) The toner costs more than the printer
3) You only get a sample toner cartridge in the printer
4) There are no chip counter hacks on the market for this printer when refilling toner.
5) I've been considering hacking the chip to allow perpetual Toner refills, but I need a printer first.
Ancel