On 11/24/2016 8:21 AM, AncelB mosaicmerc@... [Homebrew_PCBs] wrote:
thru the unit.
I bough one from Jamesco and it works well, I don't have to sit there
and put the board through multiple times, while it does it's thing I get
the etching chemicals ready, also make sure you set the right
temperature for the heater.
--
Cecil - k5nwa
http://thepartsplace.k5nwa.com/
> Hi, do u think that laminator would benefit from a mod like this one?You still need to do the hardware modifications to allow a thicker board
> https://cdn.hackaday.io/files/3363143882592/Toner-Transfer-laminator%20video.mp4
>
> https://hackaday.io/project/3363-apache-al13p-laminator-one-pass-pcb-toner-xfer
>
>
thru the unit.
I bough one from Jamesco and it works well, I don't have to sit there
and put the board through multiple times, while it does it's thing I get
the etching chemicals ready, also make sure you set the right
temperature for the heater.
--
Cecil - k5nwa
http://thepartsplace.k5nwa.com/