I would not be too sure this is the equivalent model to the one on the Pulsar site.
Note the temperature control and meter on the Pulsar site versus this one with a select switch. I suspect this model has a way lower max temperature than the generic Apache clone.
Also the maximum material thickness is shown as 0.010" (250 microns) in the detailed specs which is way to low. The decal on the machine does show 250 mil which would be a quarter inch but I suspect that they meant 250 microns.
Graham
---In Homebrew_PCBs@yahoogroups.com, <kbyrne10@...> wrote :
---In Homebrew_PCBs@yahoogroups.com, <kbyrne10@...> wrote :
Has an one used this laminator also listed on pulsar site to help other person who posted.http://www.ebay.com/itm/110V-12-5-Metal-Frame-Hot-Cold-4Rolls-Pouch-Film-Laminating-Machine-Laminator-/261802359454?hash=item3cf4a2fa9e:g:yqgAAOSwKtlWleOU