I worked for Rank Xerox (UK) many years ago. The original Xerox 1385 flat-bed machine was manually operated, and I remember seeing an app. note that described how it could be used for making PCBs. IIRC, the toner image on the Xerox plate was transferred onto the PCB, fused, and the PCB etched. It was OK for prototypes.
73, Leon
G1HSM
On Sunday, 30 October 2016, 15:38, "Dave Daniel kc0wjn@... [Homebrew_PCBs]" <Homebrew_PCBs@yahoogroups.com> wrote:
Xerography is an electrostatic process, yes. I have not kept up with
the processes used since the 90s, but it used to be that the toner
was essentially very small plastic balls embedded with carbon. The
toner was manipulated through the print process by charging the
toner one way and the photoreceptor (print drum or organic belt) the
other way and bringing them together so that the toner formed an
image on the photoreceptor. Then the paper was put in contact with
the toner-laden photoreceptor and the toner was transferred from the
photoreceptor to the paper by yet another electrostatic operation.
Once the toner was released to the paper, the toner image on the
paper was fed through some sort of fusing process to permanently
(more or less) attach the toner to the paper.
However, we experimented with a completely different process where the toner contained iron as well as carbon and the toner was manipulated partially with electrostatic mechanisms and partly by magnetic mechanisms. I don't remember much about the overall print process. We got it working well enough to demonstrate but not well enough to productize it. IIRC, The original work was done by Kodak in the 80s.
DaveD
However, we experimented with a completely different process where the toner contained iron as well as carbon and the toner was manipulated partially with electrostatic mechanisms and partly by magnetic mechanisms. I don't remember much about the overall print process. We got it working well enough to demonstrate but not well enough to productize it. IIRC, The original work was done by Kodak in the 80s.
DaveD
On 10/30/2016 9:10 AM, Roland Harriston
rolohar@... [Homebrew_PCBs] wrote:
Pardon Me:
But isn't "xerography" or laser printing essentially an electrostatic process.
It's been a long time since I read about it, so correct me if I am in error.
So, a ferrous (iron) content would be in the toner?.
Regards,
Roland F. Harriston P.D.
********************
This email has been checked for viruses by Avast antivirus software.
www.avast.com