Does the R2400 have an adjustable platen gap? If so, you should be
sure it's fully open.
At 03:29 PM 7/14/2016, you wrote:
sure it's fully open.
At 03:29 PM 7/14/2016, you wrote:
>Hello everyone,
>
>I'm new to the group, I've also posted something in inkjet printer
>circuit board printing group and haven't got a response in over two
>weeks about. Figured I'd give it a shot here. I did try researching
>the topic to the best of my knowledge, I've search the group and
>google quite a bit. I got an Epson R2400 and when I try to use 1/16"
>double sided copper clad board through the rear of the printer, the
>print head bangs off the sides of the board, slightly prints, smears
>a lot and makes a grinding noise. I have read about Bazza and Barry
>Cooper using 1/16" board though from my understanding. They just
>don't go into much detail with how to do it. I have the paper set to
>premium semigloss photo paper according to many other forums saying
>its the thickest, paper option set to roll banner, and maintenance
>thick paper checked. If I'm miss understanding the previous post or
>there is anything I'm missing please let me know.
>
>Thank you and I appreciate any advice I may get.
>
>------------------------------------
>Posted by: dmyova@...
>------------------------------------
>
>Be sure to visit the group home and check for new Links, Files, and Photos:
>http://groups.yahoo.com/group/Homebrew_PCBs
>------------------------------------
>
>Yahoo Groups Links
>
>
>