When I do a board with Hot Toner Transfer I have always had better luck running the board through the Scotch laminator I use 3 times to preheat before I applied the paper. Then 4 more times , once in each direction to transfer the toner.
There is information about using packing tape applied to printer paper as a transfer medium at
TheRandomLab: DIY PCBs on the cheap: toner transfer with Box Packing Tape and a Hair Straightener / IronI have not tried it, but have some small boards coming up so might give it a try.
There is information about using packing tape applied to printer paper as a transfer medium at
TheRandomLab: DIY PCBs on the cheap: toner transfer with Box Packing Tape and a Hair Straightener / IronI have not tried it, but have some small boards coming up so might give it a try.
DuWayne
kv4qb.blogspot.com