I see some problems with the press & peel results, under etching & over
etching. This implies inconsistent adhesion.
Here is my process that works fairly consistently down to SMT (0603) and
12 mil traces, w/o requiring rework.
https://hackaday.io/project/7938-pcb-smt-maker-lab-home
Ancel
etching. This implies inconsistent adhesion.
Here is my process that works fairly consistently down to SMT (0603) and
12 mil traces, w/o requiring rework.
https://hackaday.io/project/7938-pcb-smt-maker-lab-home
Ancel