The FBS 115/E can drill #96 holes (0.0063”). The Dremel 395 has nothing on the FBS 115/E. Completely agreed. From: Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com] Sent: Saturday, February 27, 2016 3:00 PM To: Homebrew_PCBs@yahoogroups.com Subject: [Homebrew_PCBs] Proxxon rotary tool/press/vice and mods I just got the Proxxon FBS 115/E tool, matching press and mini vise to complement a KT70 compound x-y table I had prev. acquired for a project that never happened. That tool/press has minimal run out and is probably 10x better than the Dremel 395 and 'plastic' press combo. The Dremel gets relegated to grinding, polishing and cutoff wheel use now. PCB work is reserved for the Proxxon. Here are the mods I did..to enhance Vise stability and PCB drilling. https://cdn.hackaday.io/files/7938339619392/PROXMOD.jpg https://cdn.hackaday.io/files/7938339619392/PROXMOD2.jpg https://cdn.hackaday.io/files/7938339619392/PROXMOD3.jpg
Message
RE: [Homebrew_PCBs] Proxxon rotary tool/press/vice and mods
2016-02-27 by Jeff Heiss