Homebrew PCBs

The Harbor Freight models don't look the same as the one from GB.
Do you have a HF model number of the one you have?

Thanks,
Charlie 

On 22 Feb 2016 06:25:46 -0800 "bobledoux@... [Homebrew_PCBs]"
<Homebrew_PCBs@yahoogroups.com> writes:
  
This drill is sold in the USA by Harbor Freight.  I have one. I use it
for drilling PCB's.

There is too much run out for carbide bits.  It works well with steel
bits.  The chuck will hold .020 or 0.5mm drill bits or larger bits.

My speed control quit working.  So I wired it as a switch.  So mine
operates as a single speed motor, but it has variable speed adjustment
with the belt pulleys.