A friend of mine used to use something called a unimat to drill his boards. It was belt drive,but also converted into a lathe. I borrowed it when I did some boards a long time ago From: Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com] Sent: Tuesday, February 16, 2016 9:58 AM To: Homebrew_PCBs@yahoogroups.com Subject: [Homebrew_PCBs] Re: Drilling circuit boards on the cheap: [1 Attachment] This is what I use for small boards. It only has about an inch and a half throat but is very stable. I think it was used by clock makers but there is no information available for it.
Message
RE: [Homebrew_PCBs] Re: Drilling circuit boards on the cheap: [1 Attachment]
2016-02-17 by keith printy