Homebrew PCBs

Kirk, NT0Z 
Thanks for the information. 

There is a "Sally" located about 5 miles from my home. 
Never noticed it before. 

Roland F. Harriston, P.D. 
************************** 

----- Original Message -----

From: "Kirk Kleinschmidt kirk@... [Homebrew_PCBs]" <Homebrew_PCBs@...m> 
To: "Homebrew PCBs" <Homebrew_PCBs@yahoogroups.com> 
Sent: Tuesday, January 19, 2016 3:00:13 PM 
Subject: Re: [Homebrew_PCBs] My materials for "Cold Process?" 




At Sally Beauty they call their strongest hydrogen peroxide "Salon Care Maximum Lift 40 Volume Clear Developer." 

FYI, "40 volume" = a 12% hydrogen peroxide solution. 

It seems to be on sale now for $1.50 a quart = good deal :) 

--Kirk, NT0Z 
My book, "Stealth Amateur Radio," is now available from 
www.stealthamateur.com and on the Amazon Kindle (soon) 


On Tuesday, January 19, 2016 3:46 PM, "'John Snyder' Kochcal@earthlink.net [Homebrew_PCBs]" <Homebrew_PCBs@yahoogroups.com> wrote: 





Roland 
Thanks for the specific information. 
Can you also tell us the printer and if it has oem toner or not 
And an idea of the line width and spacing size? 
John 

From: Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com] 
Sent: Monday, January 18, 2016 2:37 PM 
To: Homebrew PCBs 
Subject: Re: [Homebrew_PCBs] My materials for "Cold Process?" 



Boman33: 
I just walked in from my shop where I just completed another perfect cold toner transfer using 
a 2 to 1 ratio of "Top Care iso alcohol 70% to "Equate" nail polish remover, 100% acetone, 
from my local Walgreen's emporium. 
The PC laser image is on Office One "Business Gloss" 32lb. 92 brilliance (indication of glossy surface) paper. 
This paper is made by HammerMill Paper Co. 
Next, I will try Office Max "High Gloss" photo paper, which is thicker and much glossier 
than the above, but much more expensive. This stuff works quite well with "Hot Transfer" 
technique. 
Regards, 
Roland F. Harriston, P.D. 
****************************