Roland
Thanks for the specific information.
Can you also tell us the printer and if it has oem toner or not
And an idea of the line width and spacing size?
John
From:
Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com]
Sent: Monday, January 18, 2016
2:37 PM
To: Homebrew PCBs
Subject: Re: [Homebrew_PCBs] My
materials for "Cold Process?"
Boman33:
I just walked in from my shop where I just completed another perfect cold toner transfer using
a 2 to 1 ratio of "Top Care iso alcohol 70% to "Equate" nail polish remover, 100% acetone,
from my local Walgreen's emporium.
The PC laser image is on Office One "Business Gloss" 32lb. 92 brilliance (indication of glossy surface) paper.
This paper is made by HammerMill Paper Co.
Next, I will try Office Max "High Gloss" photo paper, which is thicker and much glossier
than the above, but much more expensive. This stuff works quite well with "Hot Transfer"
technique.
Regards,
Roland F. Harriston, P.D.
****************************