Are you 100% sure about that?
It is very easy to confuse the sides because of the rear view thing.
Note that pin 34 (ground) should be used, and pin 1 not used, this is an easy way to find the right side.
Also many NIM power supplies do not even provide the 6V, so it is unlikely for a module to need that.
You can see the pinout here:
By the way this is the website of Syd Levine, who has been a wonderful contributor on these lists in the past and would help you for sure if he was still around. I have often referred to his website since he passed away, Syd still keeps on giving.
ST
On Wed, Jan 13, 2016 at 7:29 PM, john_chortomaris@... [Homebrew_PCBs] <Homebrew_PCBs@yahoogroups.com> wrote:
No! tI dscribe the pins and I see that don't has pins on +/-24v . Also, I speak with second module cambera and seller told me this module and the others no need standar +/-24v . I'll take an andware and for the power supply but it can't tell me yet because he is beasy now.
What other must I tell him? may the current which module need? I hope to tell me with power supply.
Stefan, may modems or cell phones have good power supply?