Yahoo Groups archive

Homebrew PCBs

Index last updated: 2026-04-28 23:05 UTC

Message

RE: [Homebrew_PCBs] Heatless (cold) Toner Transfer for PCB making

2016-01-06 by alienrelics@...

It says Ethyl Alcohol, which is often denatured. Not everyone uses the same denaturing agents.

However, in one of the comments he says:
"The one I use is Ethyl alcohol (pure 96%) also called Ethanol. It's the one used as antiseptic."

Medical Ethyl alcohol seems to be about 95% or so.

Hardware store denatured alcohol seems to be about 90%.
https://en.wikipedia.org/wiki/Denatured_alcohol
Some people in the comments mentioned Everclear. It seems to be sold in 75.5% (151 proof) and 95% (190 proof).

Steve Greenfield AE7HD

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.