Homebrew PCBs

On 16. 12. 2014 13:52, Mark Lerman mlerman@... [Homebrew_PCBs] 
wrote:
> Less time, perhaps not 5 mil, but close:
>
> <http://www.instructables.com/id/Modification-of-the-Lexmark-E260-for-Direct-Laser--1/>
>
> Mark
>

Choosen printer is not available here on cheap. Nor the toner/drum. I 
sniffing around Brother HL22xx series but seems that even removing fuser 
unit dissable printer to print. There are two thermistors on unit and 
just simple tampering with correct thermistor for "hot" doesn't work. 
Seems that temperature controll throw error if thermistors doesn't 
change resistance when lamp is on or off...