On 14. 12. 2014 06:35, Camillus camillus_blockx@...
[Homebrew_PCBs] wrote:
light spectrum. The lenses in printer is not ussable as seems to come to
dark. I was tryed to use rotating mirror aproach and f theta lens from
printer but just doesn't work. the beam come out to weak but has good
focus on all line. Lense seems transparent but for deep blue seems that
is pretty opaque.
Slavko.
[Homebrew_PCBs] wrote:
>Forget to use that. The laser wavelength is just in oposite side of
>
> Yes you have absolutely right, but drums are wasted with the toner
> cartridges all the time. And also what kind of photo resist is used on
> those drums. They warn always to cover them for light when servicing.
> And the laser could be replaced from IR to UV, it is all maybe just
> dreaming, that is why I posted it here so the smart guy's can wake me up
> ... LOL
>
light spectrum. The lenses in printer is not ussable as seems to come to
dark. I was tryed to use rotating mirror aproach and f theta lens from
printer but just doesn't work. the beam come out to weak but has good
focus on all line. Lense seems transparent but for deep blue seems that
is pretty opaque.
Slavko.