Homebrew PCBs

I'll get the data to you in a few days, but the ISP is in the same 
configuration as the AVRISP ISP programmer. 
<http://www.batsocks.co.uk/readme/isp_headers.htm>. It's the 6 pin 
connector, and the diagram shows you viewing it from the top. The 
cable from the programmer goes to the right, assuming you are using 
the AVRISP such 
as<http://www.digikey.com/product-search/en/programmers-development-systems/in-circuit-programmers-emulators-and-debuggers/2621880?k=avrisp>.

Mark

At 02:05 PM 8/5/2014, you wrote:
>At 05:04 PM 05-08-14, you wrote:
> >
> >
> >I'll get it together in the next couple of days and send the both the
> >hex and asm files to you. What mcu does your board use?
>
>TINY 13 on both boards.
>I have two versions (two different boards), your first two versions, 
>years ago.
>I'll send to your mail the photo.
>Also, please let me know how to connect the 6 pins ISP connector.
>Cristian
>
>
>
>------------------------------------
>Posted by: Cristian <crissstian@...>
>------------------------------------
>
>Be sure to visit the group home and check for new Links, Files, and Photos:
>http://groups.yahoo.com/group/Homebrew_PCBs
>------------------------------------
>
>Yahoo Groups Links
>
>
>