"palciatore@... [Homebrew_PCBs]" <Homebrew_PCBs@yahoogroups.com> writes: > Am I correct in assuming that "tear-dropping" refers to adding either > chamfers or fillets where a trace meets a side of a rectangular, oval, > or round pad which is wider than the trace? In general, yes. Examples at the bottom of: http://www.delorie.com/pcb/teardrops/ (click to expand each image)
Message
Re: [Homebrew_PCBs] To fillet or not to fillet on a PCB pattern
2014-08-02 by DJ Delorie