Hi ,
I also use Eagle, excellon drill files with Galaad copper cam.
Usually the error you have is a mm to inch conversion problem. Make sure your setting are consistent mm or inch.
Also Galaad softwere wants to see trailing zero's in the settings menu with Excellon drill files.
I hope this is some help.
I hope this is some help.
much respect,
Boots-2b1
Sent from my iPhone
On Jul 5, 2014, at 8:58 AM, "alexanderhosford@... [Homebrew_PCBs]" <Homebrew_PCBs@yahoogroups.com> wrote:
Hello all,
I'm having some issue with importing an Excellon drill file, generated from Eagle using the stock 'excellon.cam' job, into Percival, the PCB module available for Galaad.
This is a render of where my drills should be, shown with a pad view in Eagle;
imgur: the simple image sharer
And this is what happens to the drills once they are imported into Percival;
imgur: the simple image sharer
I can't quite put my finger on it, but I don't think that's right?
Has anybody got experience with this workflow and can anyobdy shed any light onto what's happening?
Regards
Alex