Most boards are made with fiberglass but an internet search for "thin PCB material" instantly yielded over two million results. I am sure that somewhere in there you would find a supplier of a suitable material.
But I see you are going another way so good luck with it. I have my own boards to make now. Bye!
---In Homebrew_PCBs@yahoogroups.com, <rockets4kids@...> wrote :
But I see you are going another way so good luck with it. I have my own boards to make now. Bye!
---In Homebrew_PCBs@yahoogroups.com, <rockets4kids@...> wrote :
On Tue, May 13, 2014 at 7:22 PM, Paul Alciatore palciatore@... wrote:
> Do you really need a fiberglass backed board? There are otherI don't need fiberglass, but I have not found a source for thin,
> materials available that would allow punching with far less problems
> with punch wear.
non-fiberglass board
> I would talk to a PC board manufacturer. I am sure they can make someAt the suggestion of others I have investigated this. It turns out
> good suggestions.
that routing out all these discs is not going to be nearly as
expensive as I had thought, and that is now the route I am going to
take.
-p.