Homebrew PCBs

I have two laminators, one from Harbor Freight and another one. I can not get either of them anywhere near hot enough to transfer toner... 

 
Christopher R. Fraction 
>
>My Thought for Today: 
>Live Life like there is something
>VERY important to do tomorrow
>that ONLY you can DO
>Because there IS!!!!!
On Saturday, April 12, 2014 12:34 PM, Stefan Trethan <stefan_trethan@...> wrote:
 
  
If you use a laminator (or fuser unit from a laser printer) you will eliminate this problem of variable board size.

I haven't done a board of any size with success using an iron, at least not consistently.

ST


On Sat, Apr 12, 2014 at 6:19 PM, <krisfr@...> wrote:


>
>The higher the wattage the more heat the iron will put out. I am trying to do toner transfer to a board that is more than twice the size of the surface of the iron. It is also 2 oz. and double sided. The board itself will suck heat away from the area I am trying to transfer the toner to. Has anyone done a board of this type and size with success? What Size iron in wattage did you use... THANKS for all answers.... 
>
>
>